When constructing with U-Tracks, Studs, or Galvanized Angles, it is essential to firmly secure them to ensure stability and support. To install steel profiles or panels on any floor or beam, use expansion screws or precision nail guns for accuracy.
To enhance sound insulation in these partitions, it is strongly recommended to place flexible rubber sheets over adjacent steel profiles. In doing so, it curtails noise from penetrating multiple areas of your space.
For U-track ceiling installation, it is recommended to maintain a maximum separation of 600mm between the fixing points on the steel profiles. This ensures stable suspension while also complying with structural safety regulations. Keep in mind that precise installation is crucial to achieving optimal results.
In situations of high humidity, it is recommended to use a 120mm concrete wall as the foundation for partition walls. This platform, once installed, will accommodate Studs’ security. This not only ensures structural stability but also provides superior moisture resistance in line with your needs.
To meet the necessary design requirements, all steel stud installations must remain vertical with a defined spatial interval of no more than 400 mm. This ensures structural integrity and safety for the success of your project!
To successfully install gypsum boards, we recommend positioning studs without fixing them. This allows adjustments during installation to prevent miscalculations that could result in irregular gypsum board dimensions. Remember, precise alignment is paramount! Let us know if you need any further assistance.
When installing the support brackets, it is important to keep in mind that they should be spaced 400 to 600 mm apart at the base. In addition, the ends of steel profiles should not extend beyond 200 mm. This ensures optimal functionality of your metal roof structure.
When planning the installation of the main channel, ensure that the appropriate number is implemented based on the available partition space. If the space is less than 3 meters or between 3-5 meters, consider this when determining the number needed to meet your requirements.
To ensure joint durability and strength, securely attach non-U-track panels to the main channel. This ensures a solid foundation for the longevity of your installation, effectively protecting your investment against premature wear and tear.
When installing partition walls, it is important to add additional Main Channels every 600 mm, especially when using infilled materials such as acoustic cotton. This addition ensures firm and continuous horizontal stability. Remember; make sure each channel serves a purposeful purpose!
This text outlines our solutions for the proper installation of door and window openings.
First, it is important to understand the configuration of these openings. For floor-to-floor tracks, a minor repair procedure is required. In addition, we recommend installing studs on both sides of doors and windows – on the interior corridor and exterior facing the building entrance. Additional reinforcement can be achieved by inserting wooden squares between studs where needed.
For vertical installations such as U-Tracks, they can be placed either at the base or at the top of an exit point. To secure them for studs, we recommend using screws that are evenly spaced on both sides. If the width of the door or window exceeds 1800mm, additional support may be required through wooden squares.
Ensure adequate structural support before decorating with panels. Attention should be paid to the installation practices of equipment, pipes, and fillers to ensure that they meet predetermined specifications. Any deviation from these prerequisites requires prompt resolution.
