Product specification range
Available in multiple sizes, the most common partition profile sizes are 50 mm, 75 mm, and 100mm.
Product identification protocol
First, the width of the steel profile of the partition wall; second, its height, and finally, the thickness of the cross-section.
Design specification for appearance
The light steel profile used for partition walls must be flat and free from discernible bumps, corners, or edges. In addition, there should be no abrasive or burr-like features along the incision that impede the use of the profile or its role as a strong partition wall. The zinc-coated layer of the profile should be free of flaking, swelling, or peeling defects, ensuring durability and resistance to rust and corrosion. During the inspection, the manual visual inspection should be carried out at a distance of 0.5 meters from the product under bright illumination to facilitate the identification of any defects or irregularities. The surface of the light steel profile of the partition wall should be zinc-coated and rust-resistant, providing a durable and attractive finish that shields the profile from environmental elements and preserves its aesthetic appeal. The zinc coating quantity of the profile typically ranges between 80g/㎡ and 120 g/㎡, providing adequate protection against rust and corrosion whilst preserving the profile’s lightweight and cost-effective nature.
Steel profiles show strong durability and can last for decades in a variety of settings. Their lifespans depend on variables such as application and environment, yet typical design lifespans range from 20 to 30 years. By adhering to optimal installation, utilization, and routine maintenance, these steel profiles can easily meet their guaranteed life span.
However, the service life of steel profiles can be compromised by different operating environments and working conditions. For example, extreme exposure to temperature and humidity, as well as seismic activity, high winds, and other detrimental factors, can significantly reduce the service life of steel profiles. In addition, improper installation, maintenance, and use methods can also affect the service life of the steel profile.
Therefore, it is imperative that those seeking to maximize the longevity of steel profiles strictly adhere to the relevant technical specifications and standards for their operation. These operations should be carried out by skilled and qualified personnel with full knowledge of the installation and use of the material. In addition, regular maintenance schedules are essential to ensure profiles remain in prime condition, ensuring their longevity.
Compared to the introductory resistance profile, the WITAPROFILE collection uses galvanized snowflake sheets, known for their superior quality. This property guarantees increased resistance to fire, rust, and external elements, making WITAPROFILE products suitable for a variety of applications requiring high durability and resistance. In addition, the iron and zinc in these sheets provide additional anti-aging properties, enhancing the overall usability of WITAPROFILE products throughout the manufacturing process and beyond. Designed to meet industry standards, WITAPROFILE products effortlessly pass various industry-specific tests, ensuring reliability, durability, and adherence to the highest quality and safety standards. The WITAPROFILE collection is also designed for ease of construction, being easily installed and maintained, making it ideal for a variety of robust construction projects. Moreover, the collection offers exceptional aesthetic effects, enabling a wide range of design styles, making it an optimal choice for contemporary decoration projects.
Before starting the task of affixing the light steel profile of the partition wall, critical steps include ensuring that the necessary tools and materials are available. This involves procuring suitable light steel profiles, strategically positioned parallel and evenly spaced. After profiles have been established, studies should be integrated on both sides of the profile for verticality to U-tracks for structural integrity. After installation, it is imperative to affix accessories to secure partition materials such as gypsum board and calcium silicate board for durability. Subsequently, it is essential to modify profile spacing for smoothness, stability, and aesthetic appeal. After installation, rigorous inspection of the profile structure to detect any loosening or warping is essential for safety and durability.
How feasible is it to build a partition without making any substantial changes to the current wall configuration?
First and foremost, it is crucial to evaluate partition dimensions and the intended site before initiating installation planning. Once the optimal location is identified, the initial step is to etch the spot on the wall for a firm partition attachment. To prevent errors, it is essential to mark the partition location. Subsequently, the procurement of related materials begins, taking into account your chosen partition material. For example, panel boards, lumber, or metal studs may be needed. In addition, suitable tools such as a drill, saw, and hammer should be prepared for a seamless installation process. Following the collection of materials and tools, the installation of studs commences. It is essential to ensure that studs do not disrupt the wall structure due to potential structural damage. Therefore, stable and supportive studs should be selected and wall penetration avoided. After the studs are installed, they must be secured to the wall using a nail gun or expansion bolts, depending on the type of stud. The fastening must be robust to prevent partition displacement during installation. Once the studs are securely affixed, the main channels and partition panels are attached to the vertical studs using screws, ensuring a firm partition-wall connection. Finally, after the partition is installed, doors or windows can be added, using appropriate decorations and adjustments according to your specific requirements.
Distinct from conventional wood profiles, light steel profiles offer key benefits. Their robust stability enhances overall structural integrity over time. Their robustness further ensures that they serve as a dependable option across different applications.
- Exceptionally firm and resilient: The construction of the lightweight steel profile is engineered for exceptional stability and resistance to deformation, minimizing the likelihood of deformation or instability under significant weight or pressure. The inherent flexibility of the profile enhances its ability to withstand greater weight and pressure, providing substantial safety and stability to the overall structure of the decoration.
- In terms of durability, the light steel profile has superior corrosion resistance and durability, extending its service life and ensuring a lasting decorative effect.
- In addition, the production process of light steel profiles does not require tree felling, significantly reducing environmental impact and aligning with contemporary global environmental conservation initiatives and policies.
- Constructing a structure using light steel profiles is simpler than conventional methods of wood, concrete, or metal cutting and shaping, especially in material installation and disassembly. This approach can significantly reduce construction time, especially for traditional buildings that require extensive labor due to their complexity and size. It conserves manpower and materials, improving overall construction efficiency for property owners.
In conclusion, light steel profiles offer several distinct ornamental benefits.
The price of light steel profiles fluctuates widely due to factors such as the region of purchase, brand, and specific specifications. For example, a premium product with superior materials and advanced production methods may cost more than a similar item from an obscure brand or with limited specifications. Therefore, when choosing a light steel profile, it is crucial to consider factors such as material quality, product durability, and environmental impact. In addition, the overall project cost, including installation and maintenance costs, should also be considered to determine whether the light steel profile is a cost-effective solution. To make an informed decision, it is advisable to consult a professional decoration firm or the building materials market for precise pricing information and a deeper understanding of the various options available.
